Heating demand to less than 50kwhm2 is this possible ?
As we head towards decarbonisation of the grid the drive for energy efficiency is about reducing the waste.
We all use and waste energy if our buildings have not been thermally improved.
The drive in our minds should be to a higher standard than Building Regulations a drive to either the AECB retrofit standard, EnerPHit or “Passive House standard” this should include a reduction in electricity demand ,and water usage.
The cost of building in measures might mean you can undertake the work in stages.
The first step is a call to discuss this.
The trouble with fabric performance is we cannot see it so its hard to understand, we have been involved in energy efficiency projects in both Commercial and Domestic buildings for over sixteen years we do
Our understanding goes back to the "Energy World Development" Milton Keynes (1990) which at the time was ground breaking.
All electric heating, super insulated, heat recovery, wind turbine and solar gain in the winter.
Consulting First
We always put our focus on our customers. We want you to find the solutions that perfectly suits your needs, which is why we offer comprehensive consulting services to help you make an informed decision.
Survey & Analysis
the survey is about the risk to health your building and any repairs that may need attention first. the unintended consequences of not undertaking work prior is the retrofit wil ultimately fail.
Model in Software
We have been using software since it was developed for Domestic, Commercial and the passive methodology. This will provide you with answers at an early stage,.informed and on point
Reduce Risks
If the building is of heritage stock pre 1919 then undertaking the right work using the right tools and methods. This will enhance the building. The building will last aiding sustainability this is at the heart of what we do as surveyors.
Reduce Energy Demand
Reducing energy demand means less waste, less discomfort, better health,better indoor air quality and a raft of benefits including lower bills.
Increase Comfort
Some measures might not cost much at this stage, we look at ways to increase comfort. Reducing energy need will reduce unnecessary waste from energy.
Well-being in pocket and in comfort in your building.
Key to achieving this is a building survey
This will establish the steps need to ensure a successful retrofit that works.
Insulate first ?
The key to heat pumps is the upgrade first.
Still one of the great ways to save energy is inulation. This provides a barrier to heat loss, in many cases this available at little cost in comparison to just upgrading the heating first.
These measures can be installed before moving in reducing the biggest heat loss ares in a building mainly the walls, roof, windows, and floors..
The other key factor is the cost,which is why it’s better to invest in a whole building approach.
There are lots of things to consider in this aspect before heat pumps without solar should be installed.
Our risk schedule is part of the process first.
Poor installs lead to complications
Dampness not cured leads to failed insulation
Wrong materials used leads to poor results
Lack of understanding by the installing party causes the performance gap results not achieved.
All this can be avoided at the early stage to avoid the above.
Renewables
Using less energy whats your plan?
Our feasibility study is part of the building survey. This is what we call the Home energy plan or Commercial building energy plan.
Is it a good time to fit renewables.?
Should we have more insulation?,
Should we make our building more airtight?.
Should we upgrade the existing heating system.?
Are we ready for solar?
These are all great questions what’s the best Advice for you
©Copyright. All rights reserved. ABPS limited
We need your consent to load the translations
We use a third-party service to translate the website content that may collect data about your activity. Please review the details in the privacy policy and accept the service to view the translations.